National MEP Engineers’ MEP BIM modeling and coordination solutions deliver what architects in the USA want. You design the building, and we engineer the mechanical, electrical, plumbing, and fire protection systems and model each in Revit alongside your drawings. The result is that problems show up on screen before they can surface on site.
State-licensed PEs
200 to 500
Revit and Navisworks
Model and sealed drawings
19 states + Washington, D.C.
Clash report at each round
National MEP Engineers’ MEP BIM modeling and coordination solutions deliver what architects in the USA want. You design the building, and we engineer the mechanical, electrical, plumbing, and fire protection systems and model each in Revit alongside your drawings. The result is that problems show up on screen before they can surface on site.
State-licensed PEs
200 to 500
Revit and Navisworks
Model and sealed drawings
19 states + Washington, D.C.
Clash report at each round
An MEP BIM service package involves developing MEPF systems as a 3D Revit model and testing them against the structure and architecture. Professional engineers at National MEP Engineers design and seal every system, and the BIM team models that same design, so the stamped drawings and the model match.
One dedicated team handles all trades, allowing you to focus on working with a single set of files and a single point of contact.
LOD is basically the degree of detail a model carries. National MEP Engineers follows the BIMForum specification, which helps you and your contractor interpret the LOD consistently. LOD 100 is conceptual only, so our MEP work begins at LOD 200.
LOD
Phase
What You Get
200
Design Development
Approximate systems, sized equipment, reserved space
300
Construction Documents
Dimensioned systems that precisely reflect the sealed set
350
Coordination
Supports, connections, and clearances for trade review
400
Fabrication
Detailed by the installing trade, reviewed by our team
500
Close-Out
Field-verified record model
LOD
Phase
What You Get
200
Design Development
Approximate systems, sized equipment, reserved space
300
Construction Documents
Dimensioned systems that precisely reflect the sealed set
350
Coordination
Supports, connections, and clearances for trade review
400
Fabrication
Detailed by the installing trade, reviewed by our
500
Close-Out
Field-verified record model
Space First
We start by reserving shafts, mechanical rooms, and equipment zones early.
Systems Modeled
During this stage, systems are sized, modeled at LOD 200, and checked for ceiling conflicts.
Coordinate and Document
We model to LOD 300, then 350 for coordination. At each round, we produce clash reports, and the sealed sheets come from the model.
Support in the Field
We answer any RFIs, review submittals, and update the record model based on contractor as-builts.
National MEP Engineers work in the client’s Revit versions 2025 through 2027, and build to its BIM Execution Plan. Codes come from the editions a particular project’s jurisdiction has adopted, with due consideration to the most recent local amendments.
Revit
Navisworks Manage
Bluebeam Revu
ReCap Point Clouds
Autodesk Forma Model Coordination
Procore or Revizto
Revit
Navisworks Manage
Autodesk Forma Model Coordination
Procore or Revizto
Bluebeam Revu
ReCap Point Clouds
Ceilings Stay Intact
We assess pipes, ducts, and conduits relative to your ceiling heights and structure before requiring a redesign.
Permit Sets Read Cleanly
Reviewers go through the sealed drawings. We pull the MEP sheets from the model itself, so that they line up with yours.
Fewer RFIs
We identify and resolve clashes within the model. This means contractors have fewer questions to ask and you have fewer change orders to handle.
Seismic and Wind Coordination
Where required, we coordinate seismic bracing (Chapter 13 of ASCE 7) and rooftop equipment anchorage with the structural engineer.
National MEP Engineers holds licenses and has completed projects in the following states:
Alabama
Georgia
Maryland
Texas
Virginia
Washington, D.C.
Illinois
Kansas
Alabama
Georgia
Illinois
Kansas
Maryland
Texas
Virginia
Washington, D.C.
Has it ever crossed your mind how healthcare facilities’ lighting...
At present, the worldwide MEP service market is at a...
As you waltz into a well-designed recording studio or office,...


Real results speak louder than any promise we could make. Explore the experiences of the architectural firms we’ve partnered with to scale their production capacity. From overcoming submission challenges to delivering accurate submittals on tight deadlines, see how our team is helping projects cross the finish line and how we can help you do the same. Your project’s success is our biggest win.
Real results speak louder than any promise we could make. Explore the experiences of the architectural firms we’ve partnered with to scale their production capacity. From overcoming submission challenges to delivering accurate submittals on tight deadlines, see how our team is helping projects cross the finish line and how we can help you do the same. Your project’s success is our biggest win.
Licensed professional engineers from specific states design and seal the systems our dedicated BIM team models. If another engineer of record owns the design, we model theirs.
We follow the editions adopted by the specific jurisdiction where the project sits, for example, California's Title 24. While the 2026 NEC and ASHRAE 90.1-2025 have been published, several states still use earlier editions.
National MEP Engineers offers full-scale MEP BIM support for all types of builds, including healthcare projects. For medical gas, emergency power, and ventilation requirements, we follow NFPA 99, NFPA 110, ASHRAE 170, and the applicable state’s FGI rules.
Yes, we follow your BIM Execution Plan at every step. Every single model we build follows the specific client’s LOD matrix, naming, and classification, such as OmniClass or UniFormat.
We do run energy models, but separately. We use load calculations to determine proper equipment sizing, and the energy model helps evaluate the building's energy performance based on Appendix G of ASHRAE 90.1 or the client’s IECC path, leveraging tools such as Trane TRACE, IES VE, or eQUEST.
We are pioneers in innovative, energy-efficient MEP designs. With over three decades of experience, we ensure quality, compliance, and cost-effective solutions for all project types. Contact us today!
Copyright © 2026 natlmep.com. | All rights reserved
Our website uses third-party cookies to enhance user experience and analyze site performance. By continuing to use this site, you consent to our use of cookies as described in our Privacy Policy .
Unlock Our Technical Capabilities
|
|
Thank you for Signing Up |
|
|
Thank you for Signing Up |

